Hunter Pacific ceiling fan Concept 2 (Brushed Aluminium)
Hunter Pacific ceiling fan Concept 2
132cm (52") blade
The Concept 2 is a 1320mm (52") ceiling fan, similar to the original Concept with the exception of the conical canopy cover, the screw cover plate and its flatter motor housing, which were all added to modernise it to suit current architectural trends. The blades attach directly to the motor housing eliminating the need for an external blade carrier. The Concept 2 also has an integrated clip-on light system which is available as an accessory. This allows users the flexibility of adding a light to the fan at a later time.
Concept 2 ceiling fans can be installed in a variety of locations both inside the home as well as in out door areas provided that the roof is sealed and there is no opportunity for water to encroach on the motor. Both timber and plastic blades are fine for outdoor installations however we do recommend plastic blades over timber blades as they will withstand outdoor conditions better.
Please note if timber bladed fans are installed in outdoor locations the blades may needed to be replaced more regularly as the blades may warp to exposure to higher levels of moisture in the air.
The Concept 2 motor housing is made from die cast aluminium thus joining within the material is eliminated. This significantly extends the longevity of the product, as the opportunity for rust and material degradation is almost completely removed.
Concept 2 ceiling fans are available in a range of finishes including white, white birch, black, brushed aluminium and polished aluminium.
The Concept 2 ceiling fan has a 16 pole, 153mm x 18mm motor. All Hunter Pacific fan motors use vacuum impregnated high-grade copper windings, silicon-steel stators and sealed bearings for long life and quiet operation. The wall controller in conjunction with the stator windings ensures optimum speeds for all conditions. With minimal motor movement and a cool operational temperature this powerful motor is guaranteed lasting operation.
Concept 2 is a 4 bladed, 1320mm (52") ceiling fan. The blades are made from New Zealand plywood and are placed into sets based on accurate weight measurements removing almost all unwanted movement during fan operation. Blades are painted with finishes that match the motor housing colours and the paint also acts as an additional layer of protection on the wooden blades.
The Black and Silver Ice Concept 2 fans have New Zealand plywood blades laminated with beautiful timber finishes or a non-laminated single colour designed to complement the body of the fan. A high gloss UV resistant coating adds lustre and a finishing touch that makes the premium Concept 2 range really stand out.
The Concept 2 fan is available with 1320mm (52") moulded blades, these blades also match the colour of the motor housing. There is also the option of using clear moulded blades which allows for the functionality of a ceiling fan with minimal visual obstruction to the room.
Black and Silver Ice Concept 2 are not intended for use with Concept 2 moulded blades.
The blade pitch is 12 degrees allowing the fan to produce greater air flow.
Installation of this ceiling fan should be performed by a registered electrician or a qualified person recommend by our company, while the installation charge is not included in our sales price.
For installation we can arrange an appointment with the official appointed contractor, the charges will be HKD450 for 1 fans, or HKD 400/pc for 2 or more fans (Hong Kong only, except outlying islands.)
All colours on our website are for reference only, actual product colours may vary a little bit, due to different colour settings of every screen device.
Please note: most of our furniture products are made-by-hand, therefore the dimensions are for reference only, and may marginally deviate.
** Special note:
Please always cover your outdoor furniture when not in use. The Hong Kong climate is exceptionally harsh. Make your furniture last longer by treating it with care!